Skip to Main Content
AVEVA™ Products Feedback Portal

Welcome to our new feedback site!


We created this site to hear your enhancement ideas, suggestions and feedback about AVEVA products and services. All of the feedback you share here is monitored and reviewed by the AVEVA product managers.

To start, select the product of your interest in the left column. Then take a look at the ideas in the list below and VOTE for your favorite ideas submitted by other users. POST your own idea if it hasn’t been suggested yet. Include COMMENTS and share relevant business case details that will help our product team get more information on the suggestion. Please note that your ideas will first be moderated before they are made visible to other users of this portal.

This page is for feedback for specific AVEVA solutions, excluding PI Systems and Data Hub. For links to these other feedback portals, please see the tab RESOURCES below.

ADD A NEW IDEA

Clear

Ideas

OPC UA Server - Network Adapter Selection

Hi, My OEM customer currently uses TOP Server 6 instead of AVEVA OPC UA Server for different reasons. One of them is that it's possible in TOP Server 6 to specify the network adapter for the OPC UA Server which is used for communication. It would ...
Peter Rosenberger over 1 year ago in Device Integration 0

IMS 2459104 KNX ETS 5.100 fan stage support

A customer requested support for KNX ETS 5.100 fan stage support
Peter Chung over 1 year ago in Device Integration 0

Proper MQTT Support

Note that I am no MQTT expert, but theses are the things I have picked up. We need to embrace MQTT in a generic way from the Operations Control Portfolio. We need to be able to adapt to a variety of of topic name space structures and to many diffe...
Deon van Aardt about 2 years ago in Device Integration 1

Sort or filter S7TCP Tag Import

When using the Import Tags tool from the I/O Devices activity menu it lists all the available variables from the source PLC. It's not possible to sort or filter the list.
Liron Hallak about 2 years ago in Device Integration 1

MBTCP - add support for IEC1131 address format (%MW, %MX...)

The IEC1131 address format is already supported by Schneider OFS, but it would be useful to have it supported in MBTCP OI Server. It would make it easier migrating from other drivers to OI Server without changing addresses. Another advantage is al...
Florian Champalle about 2 years ago in Device Integration 0

Omnicomm should better support modern network speeds

Omnicomm has a feature that allows it to wait longer for large messages than for short messages. This feature defaults to calculations based on messages transmitted at 1200bps and has a maximum configurable rate of 38400bps. In a world where many ...
Collin Heggerud about 1 year ago in Enterprise SCADA Server / Omnicomm 0

Omnicomm retries on temporary connections should retry the connection

On Tech Support case 962469169 it became very clear that when the socket of a temporary connection was broken, Omnicomm would not re-attempt the connection until the next scheduled poll interval (e.g., 5 minutes later). I would expect that if Omni...
Collin Heggerud about 1 year ago in Enterprise SCADA Server / Omnicomm / Protocols and Commlines 0

Telemetry Server - Enable OPC UA Server [IMS Number: 4073363]

Problem: We have a request from a third-party team to connect with our system via an OPC UA Server due to their security requirements. Currently, they are using Top Server to connect with substation alarms from site RTUs, but we are exploring an a...
Guest about 1 year ago in Device Integration 1

Add ability for Omnicomm to support secure connections to devices

Enterprise SCADA desires to be at the forefront of security. Many protocols are beginning to support SSL/TLS connections to the end device, thus finally protecting that last few feet of communications from the networking equipment to the device. F...
Collin Heggerud over 2 years ago in Enterprise SCADA Server / API / SDK / Developer Relations / Omnicomm / Protocols and Commlines / Security and DMZ 7 Planned

Serialization of TCP socket establishment for connections on a Circuit

Data polling is currently serialized but the opening of sockets/connections is not. All connections on a circuit can open at the same time causing a flood of the radio network, creating outages. SEROGXI-269 contains the changes required. PMFR-495 ...
Dean Mah about 4 years ago in Enterprise SCADA Server / Omnicomm 10 Will not implement