AVEVA™ Products Feedback Portal

Welcome to our new feedback site!


We created this site to hear your enhancement ideas, suggestions and feedback about AVEVA products and services. All of the feedback you share here is monitored and reviewed by the AVEVA product managers.

To start, select the product of your interest in the left column. Then take a look at the ideas in the list below and VOTE for your favorite ideas submitted by other users. POST your own idea if it hasn’t been suggested yet. Include COMMENTS and share relevant business case details that will help our product team get more information on the suggestion. Please note that your ideas will first be moderated before they are made visible to other users of this portal.

This page is for feedback for specific AVEVA solutions, excluding PI Systems and Data Hub. For links to these other feedback portals, please see the tab RESOURCES below.

ADD A NEW IDEA

Clear

Ideas

    Showing 33 of 776

    Tollerance factor value change in case the flow meter measured value is out of pre-defined range

    Flow meter's accuracy changes when measure value is out of range. Hence, there should be a mechanism to support this feature with-in the application. This can be enabled with logical conditional statements for tolerance value settings. Instead of ...
    Kiran Karumuri over 2 years ago in Production Accounting / New features request 0 Planned

    Valve equation generation with-in the application as utility

    Flow estimation valve equation being generated outside the application and same being configured with-in the application during project implementation stage. Utility with-in the application will not only enables the services and also the customer ...
    Kiran Karumuri over 2 years ago in Production Accounting / General 0 Planned

    Node Balance report generation with-in APA

    Many customers looks at node wise balance report to track the imbalances at micro level to check, review and validate. Manual report configuration and preparation is cumbersome and time taking. Auto generation of node wise report with-in the appli...
    Kiran Karumuri over 2 years ago in Production Accounting / Reports 0 Planned

    OSM Improvement proposal - Operator areas into CoW as fixed fields folder into area codes

    User requested priority of P2 High could enter a new information element on isolations (IP IL) between location and area codes such as here operator areas. This should be searchable on IP and IL. Each operator area consists of a set of area codes
    Ashutosh Dubey about 3 years ago in Operational Safety Management / Equipment Isolations 1 Already exists

    OSM Improvement proposal - P&ID printing on IP

    Hello, when we have large isolation plans that go over many P&IDs, there will sometimes be P&IDs without an isolation point but which are nevertheless included in the isolation segment. sometimes we have also written important information ...
    Ashutosh Dubey about 3 years ago in Operational Safety Management / Equipment Isolations 1 Already exists

    OSM Improvement suggestions - Check box inside the IP I search field

    "If you are going to search for an IP or an IL, you have several choices in the right-hand corner to specify the search. Among them, you have the option to select specific statuses you want to search for. Here there should be a common check box at...
    Ashutosh Dubey about 3 years ago in Operational Safety Management / Equipment Isolations 1 Already exists

    OSM Improvement Proposal - Wants the ability to send messages between users under Isolations

    "We want to be able to send messages between users under Isolations for IL/IP in COW. And would like to be able to send messages between users in COW on IL and IP during processing of isolations. We have this today in SAP when we work with WO and ...
    Ashutosh Dubey about 3 years ago in Operational Safety Management / Equipment Isolations 1 Already exists

    OSM Improvement proposal - Need for free text error on ILs in COW

    "We constantly need to be able to write comments during the jobs on the ILs. Especially for ILs that are isolated for a long time, we need to be able to enter a status on the job or why it is isolated. It would be nice if that could be an open fre...
    Ashutosh Dubey about 3 years ago in Operational Safety Management / Equipment Isolations 1 Already exists

    OSM Improvement proposal - AT: Indication of insulation list type

    Alvheim wants to be able to see at WP what types the associated ILs are. Can, for example, be solved by getting dedicated fields for MIL and EIL/HT. Or a prefix on the IL number that shows the type of MIL/EIL.
    Ashutosh Dubey about 3 years ago in Operational Safety Management / Equipment Isolations 0 No status

    OSM Improvement proposal - Signing of insulation lists / insulation points

    "Suggestions that can make things a little easier when we have to sign for the isolation of points in IL. Per dd. you can either sign/verify one point at a time or sign for everyone in one print. If there are several of us who are isolating over s...
    Ashutosh Dubey about 3 years ago in Operational Safety Management / Equipment Isolations 1 No status