AVEVA™ Products Feedback Portal

Welcome to our new feedback site!


We created this site to hear your enhancement ideas, suggestions and feedback about AVEVA products and services. All of the feedback you share here is monitored and reviewed by the AVEVA product managers.

To start, select the product of your interest in the left column. Then take a look at the ideas in the list below and VOTE for your favorite ideas submitted by other users. POST your own idea if it hasn’t been suggested yet. Include COMMENTS and share relevant business case details that will help our product team get more information on the suggestion. Please note that your ideas will first be moderated before they are made visible to other users of this portal.

This page is for feedback for specific AVEVA solutions, excluding PI Systems and Data Hub. For links to these other feedback portals, please see the tab RESOURCES below.

ADD A NEW IDEA

Clear

Ideas

    Showing 11 of 791

    Omnicomm should better support modern network speeds

    Omnicomm has a feature that allows it to wait longer for large messages than for short messages. This feature defaults to calculations based on messages transmitted at 1200bps and has a maximum configurable rate of 38400bps. In a world where many ...
    Collin Heggerud 3 months ago in Enterprise SCADA Server / Omnicomm 0

    Omnicomm retries on temporary connections should retry the connection

    On Tech Support case 962469169 it became very clear that when the socket of a temporary connection was broken, Omnicomm would not re-attempt the connection until the next scheduled poll interval (e.g., 5 minutes later). I would expect that if Omni...
    Collin Heggerud 3 months ago in Enterprise SCADA Server / Omnicomm / Protocols and Commlines 0

    Dnaswana with DALPrompter

    Big Picture User Experience Enable SCADA Administrator to use a centralized server to monitor and troubleshoot communications on multiple systems. Detailed Description To enhance security and reduce server resources, customers typically install mo...
    Vitali Unke almost 2 years ago in Enterprise SCADA Server / Architecture / Omnicomm / Security and DMZ 0 Reviewing

    Add ability for Omnicomm to support secure connections to devices

    Enterprise SCADA desires to be at the forefront of security. Many protocols are beginning to support SSL/TLS connections to the end device, thus finally protecting that last few feet of communications from the networking equipment to the device. F...
    Collin Heggerud almost 2 years ago in Enterprise SCADA Server / API / SDK / Developer Relations / Omnicomm / Protocols and Commlines / Security and DMZ 7 Reviewing

    IEC-104

    IEC60870-101 or IEC60870-104 are the serial and IP versions of what is sometimes refered to IEC-104. These are both part of the IEC60870-5 standard, whereas ICCP is IEC60870-6, and is different. IEC_62351 is a standard for securing the various pro...
    Josie Liu almost 6 years ago in Enterprise SCADA Server / Omnicomm / Protocols and Commlines / Telemetry 0 Reviewing

    Enhance Omnicomm to make it easier for protocols to work with sub-remote status indicator.

    An enhancement for protocol developers that is standard for all protocols.
    Collin Heggerud almost 2 years ago in Enterprise SCADA Server / API / SDK / Developer Relations / Krunch and Data Manipulation / Omnicomm / Realtime API/SDK / Telemetry 0

    Indirect Tag for "SliceBy"

    In our case (and I suspect others) we have many of the same type of equipment. It would be ideal to be able to specify a tag name pattern or something of that nature in the SliceBy call. This would avoid us having to iterate through a list of tags...
    Elliott Middleton about 2 years ago in Historian & Client / Expressions 0 Submitted

    Add store-forward to the SDK "SendValues()" method for slow data rates

    For reliable, low data rate, but out-of-sequence data from non-process data sources. Requested by Mike Brost for an OEM application.
    Elliott Middleton about 4 years ago in Historian & Client / API and SDK 0 Submitted

    "aahIOSrvSvc" supports "Last" value from analog summary tags

    Local summary tags are not exposed via "aahIOSrvSvc", but the corresponding “Live” query correctly returns the “Last” value from the summary tag. This came up via a support case from Aya Helmy Mohamed Mohamed
    Elliott Middleton over 4 years ago in Historian & Client / Retrieval 0 Submitted

    Change "wwOption" Returned for Auto-Summary

    I want an indication of the data set used for my results set so I can better understand my data results. The "wwOption" column should indicate the type of data used (auto-summary vs. raw) instead of what was requested. (rows should indicate from w...
    Jake Hawkes 4 months ago in Historian & Client / Retrieval 0 Submitted