Enterprise SCADA Server

Showing 98

Request for a new telemetered point type/table

SE PA WWW integrator has industry specific telemetered point type of Water Reservoir. Reservoirs are a type of telemetered point similar to an analog but with additional calculations for volume etc. Prior to binary release integrator modified the ...

Guest over 3 years ago in Enterprise SCADA Server / Realtime API/SDK / Realtime Schema / Telemetry 1

1 VOTE

[National Fuel Gas Supply] Add Calendar Popup to Timed Inhibit Display

Customer asking if it would be possible to add a calendar popup that could be used to set the inhibit duration. This is likely something that other customers have requested in the past and may already have been implemented in other projects – if n...

Serge LeBlanc over 1 year ago in Enterprise SCADA Server 0

4 VOTE

IEC-104

IEC60870-101 or IEC60870-104 are the serial and IP versions of what is sometimes refered to IEC-104. These are both part of the IEC60870-5 standard, whereas ICCP is IEC60870-6, and is different. IEC_62351 is a standard for securing the various pro...

Josie Liu over 5 years ago in Enterprise SCADA Server / Omnicomm / Protocols and Commlines / Telemetry 0 Reviewing

1 VOTE

Ability to send historical field data to Historical for previous hour

The original enhancement request is in the attached document.

Guest over 1 year ago in Enterprise SCADA Server 2 Reviewing

1 VOTE

Enhance Omnicomm to make it easier for protocols to work with sub-remote status indicator.

An enhancement for protocol developers that is standard for all protocols.

Collin Heggerud over 1 year ago in Enterprise SCADA Server / API / SDK / Developer Relations / Krunch and Data Manipulation / Omnicomm / Realtime API/SDK / Telemetry 0

1 VOTE

NMC should not log confusing messages if the ADLDS Cross Domain Replication sender is also a receiver from another ADLDS realm

The current 2023 system designs being provided to customers include an es/deployment system with it's own ADLDS realm. AOR area/group changes are made there first and it is the global table owner for its realm. The primary production system is set...

Hugh Arai over 1 year ago in Enterprise SCADA Server / Administration / Installation / Replication 0 Reviewing

1 VOTE

Load New BLTs without Restart or Failover

No description provided

Guest almost 2 years ago in Enterprise SCADA Server 0 Reviewing

3 VOTE

Allow customers to latch alarms

Here is one problem customers are encountering with our alarming philosophy, where we replace the existing alarm with a new one with the current alarm state: Because the alarm for exceeding hi-hi isn’t latched, operators are missing that MAOP was ...

Collin Heggerud over 5 years ago in Enterprise SCADA Server / Alarms / Control Room Management 0

1 VOTE

Address nuisance error log messages related to the Trend BLT

Detailed Description Request that the Recordset open error be moved to ALWAYS as it does provide insight into an issue with trending a point 2022-05-16 12:18:36.744 [TID=0x299c] WARNING: Trend: numCollects: Recordset open (execute) failed [-214721...

Serge LeBlanc almost 2 years ago in Enterprise SCADA Server / Administration / Installation 1 Future consideration

1 VOTE

[WWW] Auto-Logon and Logoff - Is there an AVEVA-recommended solution?

Our customer, City of Calgary Water Services, will be upgrading from 7.7 to ES2023 or ES2024. They presently have some batch files in place to automatically log an operator off after a certain length of time and then automatically log in a Read-On...

Serge LeBlanc almost 2 years ago in Enterprise SCADA Server / Control Room Management / Security and DMZ 2 Already exists

Please enter your email address

FILTER BY CATEGORY