Telemetry

Showing 9 of 453

Enhance Omnicomm to make it easier for protocols to work with sub-remote status indicator.

An enhancement for protocol developers that is standard for all protocols.

Collin Heggerud 3 months ago in Enterprise SCADA Server / API / SDK / Developer Relations / Krunch and Data Manipulation / Omnicomm / Realtime API/SDK / Telemetry 0

2 VOTE

Update SNMP protocol to support v3

Big Picture User Experience Support v3 of the SNMP protocol Detailed Description TBD: any particular SNMP v3 features?

Guest 11 months ago in Enterprise SCADA Server / Protocols and Commlines 6 Future consideration

3 VOTE

Request for a new telemetered point type/table

SE PA WWW integrator has industry specific telemetered point type of Water Reservoir. Reservoirs are a type of telemetered point similar to an analog but with additional calculations for volume etc. Prior to binary release integrator modified the ...

Guest about 2 years ago in Enterprise SCADA Server / Realtime API/SDK / Realtime Schema / Telemetry 1

1 VOTE

Multiple transient state support for multistate command

Detailed Description Due to various physical factors, sometimes a 2-bit status point will transition through both the (valid) TRANSIT state as well as the (invalid) ERROR state, on its way from CLOSED to OPEN (or vice versa). This enhancement will...

Guest 11 months ago in Enterprise SCADA Server / Alarms / Krunch and Data Manipulation 0 Reviewing

2 VOTE

IEC-104

IEC60870-101 or IEC60870-104 are the serial and IP versions of what is sometimes refered to IEC-104. These are both part of the IEC60870-5 standard, whereas ICCP is IEC60870-6, and is different. IEC_62351 is a standard for securing the various pro...

Josie Liu about 4 years ago in Enterprise SCADA Server / Omnicomm / Protocols and Commlines / Telemetry 0 Reviewing

1 VOTE

Request for year to be added to the runtime structure

We've previously added an additional "year" field to the runtime structure to track hours per year for a 7.5 project. I'd like to request an enhancement to OASyS 2021 to add "year" to the runtime structure please. I see that there's a runtimeyear....

Guest about 2 years ago in Enterprise SCADA Server / Krunch and Data Manipulation / Realtime Schema 5 Will not implement

1 VOTE

Offline Rate Integration

Customers on 7.5 system often had a small change made to vdb_rate.cpp, allowing integration to continue even when a point was not fresh, using its last good rate value. This allows calculated volume integrations to match more closely with what oth...

Jake Hawkes about 3 years ago in Enterprise SCADA Server / Krunch and Data Manipulation 0 Future consideration

0 VOTE

Alarm should be generated when Omnicomm stops polling a connection record due to being added to the bad hosts list

Create an alarm when omnicomm detects DNS issues and puts a connection offscan.

Jake Hawkes 7 months ago in Enterprise SCADA Server / Alarms / Omnicomm / Protocols and Commlines 1 Reviewing

0 VOTE

Y2K38 Preparedness + Millisecond time consistency

Big Picture User Experience The Year 2038 problem (also known as Y2038, or Y2K38, or the ‘Epochalypse’) is a time datatype bug involving the use a signed 32-bit integer to store of Unix time. The data type is only capable of representing integers ...

Jake Hawkes about 1 year ago in Enterprise SCADA Server / Architecture / Krunch and Data Manipulation / Protocols and Commlines / Realtime / Realtime API/SDK 0 Reviewing

Please enter your email address

FILTER BY CATEGORY