AVEVA™ Products Feedback Portal

Welcome to our new feedback site!


We created this site to hear your enhancement ideas, suggestions and feedback about AVEVA products and services. All of the feedback you share here is monitored and reviewed by the AVEVA product managers.

To start, select the product of your interest in the left column. Then take a look at the ideas in the list below and VOTE for your favorite ideas submitted by other users. POST your own idea if it hasn’t been suggested yet. Include COMMENTS and share relevant business case details that will help our product team get more information on the suggestion. Please note that your ideas will first be moderated before they are made visible to other users of this portal.

This page is for feedback for specific AVEVA solutions, excluding PI Systems and Data Hub. For links to these other feedback portals, please see the tab RESOURCES below.

ADD A NEW IDEA

Clear

Ideas

    Showing 23 of 791

    Enhance Re-alarming application for any alarm severity

    Big Picture User Experience Enable Re-Alarming application to re-alarm alarms of any severity that were acknowledged by SCADA controller Detailed Description Background Re-Alarming application designed to re-annunciate alarms that are previously w...
    Guest over 2 years ago in Enterprise SCADA Server / Alarms 1 Future consideration

    Increase number of decimal points on Statistics screen

    Currently, the "Statistics" screen in Client only displays two decimal points of precision. We request that this be increased to help with tags that normally have very small values already (such as some vibrations for example). Screenshot attached.
    Alexander Jenkins over 2 years ago in Predictive Analytics / Model Builder Client 1 Evaluating

    Be able to constrain a point using the bulk model builder or at templates

    Request an enhancement to be able to constrain a point when using the bulk model builder. This would be used on some of our wind models and would help as we build out the 1000+ models. This might be better/more broadly accomplished by just allowin...
    Alexander Jenkins over 2 years ago in Predictive Analytics / Model Builder Client 0 Evaluating

    Historian Point Administration Enhancements

    From Alex Jenkins, 2020-04-06 Add search/filter for a specific point (had to scroll through alphabetically). It was ok since I was only looking for 6 points to update, but if there were a lot, this could be tedious. Be able to select only certain ...
    Christian-Marc Pouyez over 5 years ago in Predictive Analytics / Model Builder Client 1 Planned

    Parent control alarm suppression for ROC alarms

    The Chevron 2022 SP1 project is requesting the ability to use Parent control alarm suppression to suppress ROC alarms
    Hugh Arai almost 2 years ago in Enterprise SCADA Server / Alarms 0

    Allow customers to latch alarms

    Here is one problem customers are encountering with our alarming philosophy, where we replace the existing alarm with a new one with the current alarm state: Because the alarm for exceeding hi-hi isn’t latched, operators are missing that MAOP was ...
    Collin Heggerud almost 6 years ago in Enterprise SCADA Server / Alarms / Control Room Management 0

    Enhance Device Rollup to support subdevices from multiple datasets

    Big Picture User Experience Enhance device rollup from subdevices (telemetered and device object) that belong to datasets that differ from the parent device (top-level device) object dataset. Background With large systems it is now very common to ...
    Guest over 2 years ago in Enterprise SCADA Server / Alarms / Control Room Management 0 Reviewing

    User alarm limits should obey existing alarm deadbanding configuration

    After configuring user alarms using the “user hi” and “user lo” functionality, alarms are being generated without consideration for the alarm level deadband configured for the point. For example: A user high alarm configured at 100 will ring into ...
    Guest over 2 years ago in Enterprise SCADA Server / Alarms 0 Reviewing

    Multiple transient state support for multistate command

    Detailed Description Due to various physical factors, sometimes a 2-bit status point will transition through both the (valid) TRANSIT state as well as the (invalid) ERROR state, on its way from CLOSED to OPEN (or vice versa). This enhancement will...
    Guest over 2 years ago in Enterprise SCADA Server / Alarms / Krunch and Data Manipulation 2 Reviewing

    Ability to add new fields to almsum/event tables in ES2021

    One of our water projects will be upgrading to 2021 (or 2022) from 7.5. They've previously customized their almsum and event tables to include an additional field (a record name from a custom table). I know that we can add fields to Realtime table...
    Natalie Hunter almost 4 years ago in Enterprise SCADA Server / Alarms / Realtime Schema 2 Waiting for information